How to Use Sensor Clean Solution 120ml for Camera Sensors
By Visible Dust Australia | Published: 2026-10-22
Category: How-to Guides
Learn the correct way to use VisibleDust Sensor Clean Solution 120ml to safely remove dust and stains from your camera sensor with MXD-100 Green swabs.
Quick Answer
To use VisibleDust Sensor Clean Solution 120ml, apply a few drops to an MXD-100 Green swab and gently wipe the sensor in one direction. This solution is specifically formulated for wet cleaning and is safe for most camera sensors.
Why Use a Dedicated Sensor Cleaning Solution?
VisibleDust Sensor Clean Solution 120ml is designed to remove water-based stains and light dust contamination that a blower cannot handle. Unlike alcohol-based cleaners, it is non-flammable and non-alcoholic, making it safe to ship by airplane and gentle on your camera's sensor coatings.
Using the wrong liquid, such as isopropyl alcohol or household cleaners, can leave residue or damage the sensor's delicate surface. This solution is formulated specifically for camera sensors, ensuring effective cleaning without streaks or fogging.
Compatibility and Limitations
This solution is compatible only with MXD-100 Green swabs. Using other swabs may not provide the same absorbency or lint-free performance, and could risk scratching the sensor. Always check that your swab is the correct size for your sensor format (e.g., full-frame, APS-C, or Micro Four Thirds) before starting.
If your sensor has heavy oil-based stains or stubborn debris, this solution may not fully remove them. In such cases, consider a more intensive cleaning method or professional service.
Step-by-Step Cleaning Process
- Prepare Your Workspace: Choose a clean, dust-free area. Power off the camera and remove the lens. Lock up the mirror (if DSLR) and open the shutter to expose the sensor. Use a blower to remove loose dust before wet cleaning. Always use a blower first to avoid grinding particles into the sensor.
- Apply Solution to the Swab: Take one MXD-100 Green swab and apply 2-3 drops of Sensor Clean Solution 120ml to the swab tip. Do not over-saturate; the swab should be damp, not dripping. Check the swab is the correct size for your sensor (e.g., APS-C vs full-frame) to avoid missing edges.
- Wipe the Sensor in One Direction: Starting at one side of the sensor, gently swipe the swab across to the other side in a single, even motion. Do not press hard or go back and forth, as this can leave streaks or damage the sensor. If you need a second pass, use a fresh swab with fresh solution to avoid redistributing contaminants.
- Inspect the Sensor: After cleaning, use a sensor loupe or take a test photo at a small aperture (e.g., f/16) against a white surface to check for remaining spots. Repeat the process if necessary, but avoid over-cleaning. If stains persist, consider a professional cleaning; repeated wet cleaning can stress the sensor's coatings.
Product Highlights
- VisibleDust Sensor Clean Solution (120ml): Removes water-based stains and light dust contamination This makes it ideal for routine maintenance after a blower fails to remove all particles.
VisibleDust Sensor Clean Solution (120ml) - VisibleDust Sensor Clean Solution (120ml): Excellent dust repellent properties and anti-fogging capabilities Your sensor stays cleaner longer and is less likely to fog in humid conditions, reducing the need for frequent cleaning.
- VisibleDust Sensor Clean Solution (120ml): Compatible with MXD-100 Green swabs ONLY Using the correct swab ensures even application and prevents streaks or scratches on the sensor.
