Back to Blog
How-to Guides 2026-11-20 Visible Dust Australia 0 views

How to Clean Medium Format Sensor with MXD-100 Vswabs

How to Clean Medium Format Sensor with MXD-100 Vswabs

Learn how to safely clean your medium format sensor using VisibleDust Green MXD-100 Vswabs. Step-by-step guidance for Leica S2, Pentax 645, Fujifilm GFX, Hasselblad X1D and more.

Why the MXD-100 Green Vswab for Medium Format

Medium format sensors have a larger surface than full-frame or APS-C, so they need a swab that matches the sensor's width. The VisibleDust Ultra MXD-100 Green Vswab is designed for sensors 30 to 33 mm in the cleaning direction. That covers Leica S2, Pentax 645, Pentax 645D, Pentax 645Z, Fujifilm GFX 50S, Fujifilm GFX 50R, and Hasselblad X1D bodies.

The patented V shape and mini-channels help the swab move smoothly inside the camera chamber while keeping even liquid saturation. The fabric folding system is meant to avoid streaks, pooling, or scratches on the delicate sensor coating.

What the MXD-100 Vswab Record Confirms

  • VisibleDust Ultra MXD-100 Green Vswab for Medium Format 30-33 mm (12 Pack): Digital medium format swabs specially designated to fit Leica S2 medium format sensor size and also Pentax 645, Pentax 645D, Pentax 645Z, Fujifilm GFX 50S, Fujifilm GFX 50R, Hasselblad X1D. The swab is not a generic medium-format tool; it is sized for these specific models. If you own a different medium format body, measure your sensor width before ordering.
    VisibleDust Ultra MXD-100 Green Vswab for Medium Format 30-33 mm (12 Pack)
    VisibleDust Ultra MXD-100 Green Vswab for Medium Format 30-33 mm (12 Pack)
  • VisibleDust Ultra MXD-100 Green Vswab for Medium Format 30-33 mm (12 Pack): These medium format swabs are designated for sensor sizes ranging from 30 to 33 mm in width or vertical length of the sensor. Therefore, one has to ignore the horizontal length of the sensor as the swab moves from left to right or vice versa during the cleaning process. You only need to match the shorter dimension of your sensor (the one the swab travels across). The longer dimension is irrelevant for fit.
  • VisibleDust Ultra MXD-100 Green Vswab for Medium Format 30-33 mm (12 Pack): Compatible with Sensor Clean, Smear Away, CMOS Clean or VDust Plus sensor cleaning liquids. You can choose from several VisibleDust liquids depending on the type of residue you are cleaning. The swab works with any of them.

A Supported Wet-Cleaning Sequence with Green MXD-100 Vswabs

The steps below are based on what the product record confirms. Always check your camera manual for any specific precautions before starting.

  1. Prepare your workspace and camera: Work in a low-dust area. Lock the mirror up (if your camera has one) and open the shutter so the sensor is exposed. Use a sensor loupe to inspect the surface first.
  2. Choose the right liquid for the mark: For light dust, Sensor Clean or CMOS Clean is usually enough. For oil or stubborn residue, VDust Plus or Smear Away may work better. The MXD-100 swab is compatible with all of them.
  3. Apply one or two drops to the swab tip: Place one or two drops of cleaning liquid onto the swab paddle near the center. The mini-channels help distribute the liquid evenly across the surface without pooling at the edges.
  4. Wipe across the sensor in one smooth pass: Starting at one side, gently press the swab flat against the sensor and drag it across to the opposite side. Use a steady, even motion. Do not scrub back and forth.
  5. Inspect and repeat if necessary: Use the sensor loupe again. If marks remain, try a fresh swab with a second pass. The MXD-100's fabric folding system is designed to avoid leaving streaks.

Why the V Shape and Mini-Channels Matter

Traditional flat swabs can cause liquid to pool at the edge, leading to streaks. The V shape of the MXD-100 gives better maneuverability inside the camera chamber, while the patented mini-channels hold extra fluid and release it evenly. That means the swab stays moist longer during the cleaning pass, which reduces the chance of dragging a dry edge across the sensor.

The supplied information does not include specific instructions for how many passes to attempt or how hard to press. Use gentle, consistent pressure and stop when the sensor looks clean.

One Honest Limitation from the Supplied Record

The product record confirms the swab's compatibility with specific camera models and liquids, but it does not include step-by-step operating instructions. This means you are expected to follow general sensor cleaning best practices—work in a clean environment, use a blower first to remove loose dust, and never reuse a swab. If you are new to sensor cleaning, consider practicing on a dummy sensor or watching a manufacturer video before working on your own camera.

Related Articles

Customer Service
Home
Products
Cart
Profile