How to Clean Your Camera Sensor with the Arctic Beez
By Visible Dust Australia | Published: 2026-10-22
Category: How-to Guides
Learn how to safely remove dust from your camera sensor using the VisibleDust Arctic Beez pulsating cleaner. Step-by-step instructions, common mistakes, and essential tips.
Quick Answer
Use the Arctic Beez pulsating cleaner to safely dislodge dust from your camera sensor, then finish with a swab if needed. Follow the steps below to avoid damage and get a spotless sensor.
Why Choose a Pulsating Cleaner?
The Arctic Beez uses Swabsonic™ Technology to create gentle pulsations that loosen dust particles without touching the sensor. This makes it a safer first step compared to directly wiping the sensor, especially for light dust or debris.
It's 4X more efficient than sensor cleaning alone, meaning you may not need a full wet cleaning every time. However, for stubborn spots or smudges, you'll still need a swab-based solution.
Important Limitations to Know
The Arctic Beez is not recommended for cameras with in-body image stabilization (IBIS) that moves the sensor. If your camera has IBIS, check your manual or consider a different cleaning method.
The device requires 2 AAA batteries (not included) and does not come with swabs. Make sure you have both before starting.
Step-by-Step Arctic Beez Cleaning Process
- Prepare Your Camera: Ensure your camera battery is fully charged. Disable any sensor cleaning modes and set the camera to manual sensor cleaning to lock the mirror up (for DSLRs) or open the shutter (for mirrorless). Check your camera manual for the correct sensor cleaning mode.
- Insert Batteries and Power On: Insert 2 AAA batteries (not included) into the Arctic Beez. Press the power button to activate the pulsating action and the LED light. If the LED doesn't light up, check battery orientation.
- Position the Device: Hold the Arctic Beez close to the sensor opening, but do not touch the sensor. Move it slowly across the sensor area, letting the pulsations dislodge dust. Use the LED to see the dust being removed. Keep the device at a safe distance to avoid accidental contact.
- Inspect and Repeat: After a pass, check the sensor with a sensor loupe or by taking a test photo at a small aperture. If dust remains, repeat the process. If dust persists, consider a wet cleaning with a swab.
- Finish with a Swab if Needed: For stubborn dust or smudges, use a sensor swab with a cleaning solution. Follow the swab manufacturer's instructions for safe use. Always use a fresh swab and avoid reusing it.
Product Facts
- VisibleDust Arctic Beez Pulsating Cleaner Device: Swabsonic™ Technology powered by DC engine and smart circuitry. This ensures consistent pulsations that safely loosen dust without risking sensor damage.
VisibleDust Arctic Beez Pulsating Cleaner Device - VisibleDust Arctic Beez Pulsating Cleaner Device: Equipped with Bright LED light. The built-in light helps you see dust particles clearly, so you can target cleaning precisely.
