CurVswab Handle Set for Sensor Cleaning

Quick answer

The VisibleDust CurVswab Handle Set improves grip and edge-to-edge cleaning, reducing streak lines. Use it with compatible swabs in a single-pass motion for safe sensor maintenance.

How to clean your sensor with the CurVswab Handle Set

1. 1. Prepare the swab and solution: Attach a compatible swab (e.g., APS-C or full-frame size) to the CurVswab handle. Apply 1-2 drops of sensor cleaning solution to the swab tip. Do not oversaturate — excess liquid can seep into the sensor edges. Check that the swab is firmly seated on the handle before adding solution.
2. 2. Position the swab at the sensor edge: Hold the handle at a slight angle and place the swab tip at one edge of the sensor. Use the curved handle to maintain even pressure across the full width of the swab. Avoid pressing down too hard; the curved design does the work for you.
3. 3. Drag the swab across the sensor in one continuous motion: Slowly and steadily drag the swab from one edge to the opposite edge without stopping or reversing direction. This single-pass technique lifts contaminants off the sensor rather than smearing them. If you stop mid-stroke, discard the swab and start with a fresh one to avoid redepositing debris.
4. 4. Inspect and repeat if necessary: Use a sensor loupe or a test shot at a small aperture (f/16) to check for remaining spots. If needed, repeat with a new swab and fresh solution. Never reuse a swab. Wait a few seconds for the sensor to dry before inspecting to avoid false positives from residual moisture.

Product facts

• VisibleDust CurVswab Handle Set: Better edge to edge cleaning, better grip on the swab handle, prevents streak lines. The improved grip and curved shape let you clean the entire sensor surface in one smooth stroke, reducing the chance of leaving residue or streaks.