What the 1.3x size means for Micro Four Thirds
The VisibleDust Green Ultra MXD-100 1.3x Vswabs are made for wet cleaning Micro Four Thirds sensors. The 1.3x in the name is the size marker that places these swabs in the MFT category, so you do not have to guess whether a swab is intended for your camera format.
The practical question is not whether a swab is large or small in the abstract, but whether it is matched to your sensor. These swabs are supplied as a 50-pack of the same size, which suits photographers who clean regularly or maintain more than one MFT body.
Why the trapezoidal V shape matters in a narrow chamber
The VSwabs are a further development of the square swab, and the shape is the feature that affects handling most. The trapezoidal profile is designed to make maneuvering inside a narrow camera housing easier. That matters on Micro Four Thirds bodies, where the chamber gives you less room to angle a swab.
The same shape is intended to reduce the risk of stripping dust particles from the housing walls that could then fall onto the sensor. Because the pressure is distributed over the whole cleaning surface, the swab is designed for a more even, streak-free pass rather than a concentrated scrub.
The fabric and mini-channels: what they do for liquid control
The MXD-100 Green swabs use a unique fabric folding system tailored for cleaning a delicate sensor without leaving streaks, pooling or abrasions. The patented mini-channels, with contour, are designed to provide even saturation of the swab surface while preventing pooling and vertical flow at the edge.
That edge behavior is where many streaks begin with flat-surface swabs. The mini-channels also act as an extra reservoir to absorb excess liquid and prolong the moisture life of the swab during the cleaning pass. In practice, that means the swab stays consistently wet across the sensor instead of drying out halfway through.
Product facts for the 50-pack
- VisibleDust Green Ultra MXD-100 1.3x Vswabs (50 Pack): VisibleDust Green Ultra MXD-100 1.3x Vswabs (50 Pack) are an excellent means for thorough sensor wet cleaning of Micro Four Thirds cameras. Confirms the intended format so you can rule the swab in or out before ordering.

VisibleDust Green Ultra MXD-100 1.3x Vswabs (50 Pack) - VisibleDust Green Ultra MXD-100 1.3x Vswabs (50 Pack): The swabs are compatible with Sensor Clean, Smear Away, CMOS Clean or VDust Plus sensor cleaning liquids. Lets you keep using a VisibleDust liquid you already own instead of buying a new bottle for these swabs.
- VisibleDust Green Ultra MXD-100 1.3x Vswabs (50 Pack): The MXD-100 Green Corner Swabs have been tailored specifically to remove dust. Sets a clear expectation: these are dust-removal swabs, not a universal remedy for every kind of sensor mark.
- VisibleDust Green Ultra MXD-100 1.3x Vswabs (50 Pack): The unique fabric folding system is tailored for cleaning a delicate sensor without leaving streaks, pooling or abrasions. Explains the construction choice behind the swab and what it is designed to avoid.
Liquid compatibility: match the swab to the mark you are removing
These swabs are compatible with all cleaning solutions from the VisibleDust range, including Sensor Clean, Smear Away, CMOS Clean and VDust Plus. That flexibility is useful because the liquid, not the swab, is what you change for different residues.
The supplied product information does not specify which liquid to use for which stain, so treat the choice as your own decision based on the mark you see. The swab itself is consistent across the pack, so you are not switching swab types when you switch liquids.
When a 50-pack is the right buy
- You clean more than one MFT body: A single pack keeps the same swab size on hand for every Micro Four Thirds camera you maintain.
- You clean on a schedule rather than only when a spot appears: Regular wet cleaning uses swabs steadily, and buying in bulk avoids running out mid-clean.
- You want one swab size and one liquid family: The 50-pack pairs with any VisibleDust liquid, so you are not juggling formats or brands.
Trade-offs to weigh before committing
A 50-pack is a commitment. If you clean a single MFT camera only occasionally, a smaller quantity may be the more sensible starting point, because the swabs are designed as consumables and you will be storing the rest between sessions.
Also be clear about what this product is: a pack of swabs, not a complete cleaning kit. The supplied information does not include step-by-step operating instructions, so if you are new to wet cleaning, plan to learn the process separately rather than expecting the pack to teach it. And because the swabs are tailored for dust removal, do not assume they are the answer to every possible sensor mark.
A simple way to decide
Choose the VisibleDust Green Ultra MXD-100 1.3x Vswabs 50-pack if you shoot Micro Four Thirds, already use a VisibleDust liquid, and want a consistent swab for routine wet cleaning. If you are buying your first swab or clean rarely, start smaller and confirm the format fits your camera before stocking up.


